Gói thầu: Gói thầu số 18: Cung cấp VTTB cho hệ thống đo lường, giám sát turbine NMNĐ Duyên Hải 3

Tính năng mới trên bidwinner năm 2024
Thông tin Chi tiết
Số TBMT 20200872105-00
Thời điểm đóng mở thầu 07/09/2020 14:00:00
Đã đóng thầu
Bên mời thầu Công ty Nhiệt điện Duyên Hải Chi nhánh Tổng Công ty Phát điện 1
Tên gói thầu Gói thầu số 18: Cung cấp VTTB cho hệ thống đo lường, giám sát turbine NMNĐ Duyên Hải 3
Số hiệu KHLCNT 20190910876
Lĩnh vực Hàng hóa
Chi tiết nguồn vốn SXKD EVNGENCO1
Hình thức LCNT Đấu thầu rộng rãi trong nước
Loại hợp đồng Trọn gói
Phương thức LCNT Một giai đoạn hai túi hồ sơ
Thời gian thực hiện hợp đồng/gói thầu 120 Ngày
Hình thức dự thầu Đấu thầu qua mạng
Thời gian nhận HSDT từ ngày 2020-08-25 16:02:00 đến ngày 2020-09-07 14:00:00
Địa điểm thực hiện gói thầu
Địa điểm mở thầu website: http://muasamcong.mpi.gov.vn
Giá gói thầu 6,755,690,860 VNĐ
Số tiền bảo đảm dự thầu 70,000,000 VNĐ ((Bảy mươi triệu đồng chẵn))
Hinh thức bảo đảm dự thầu Thư bảo lãnh
Xem nội dung TBMT gốc và tải E-HSMT content_copySao chép link gốc
Theo dõi (Bạn cần đăng nhập để sử dụng chức năng theo dõi)
Mẫu sô 01A: PHẠM VI CUNG CẤP

STT Danh mục hàng hóa Ký mã hiệu Khối lượng mời thầu Đơn vị Mô tả hàng hóa Ghi chú
1 AC Power Supply 3500/15 6 bộ P/N: 3500/15 High Voltage ~AC PIM 175-264 VAC 2.3A; 47-63Hz (Bao gồm mặt trước và mặt sau) - Universal Voltage AC : + Input Voltage : 110 to 220 Vac nominal, 85 to 264 Vac rms, 120 to 373 Vac pk .The universal AC Power Supply and Power Input. Module are not compatible with the legacy High Voltage AC or Low Voltage AC units. - High Voltage DC : 88 to 140 Vdc - Low Voltage DC : 20 to 30 Vdc
2 Transient data interface và Transient data interface I/O module 3500/22M 6 bộ P/N: 3500/22M (Bao gồm mặt trước và mặt sau) -Power: Consumption : 10.5 Watts -Data: + Front Pane : USB-B + 10Base-T/ 100BaseTX I/O : 10Base-T or 100Base-TX Ethernet, autosensing + 100Base-FX I/O : 100Base-FX Fiber-Optic Ethernet - Outout: Front Panel LEDs + OK LED : Indicates when the 3500/22M is operating properly + TX/RX LED : Indicates when the 3500/22M is communicating with the other modules in the rack + TM LED : Indicates when the 3500 rack is in Trip Multiply mode + CONFIG OK LED: Indicates that the 3500 rack has a valid configuration
3 Keyphasor Module và keyphasor I/O module 3500/25 6 bộ P/N: 3500/25 (Bao gồm mặt trước và mặt sau) - Half-height, two-channel module - Accepts up to two transducer signals - 3.2 Watts typical power consumption - Input signal range: * 0.8V to -21.0V (Non-isolated I/O modules) * +5V to -11V (isolated I/O modules) - Two buffered Keyphasor outputs - 504Ω maximum buffered output impedance * -24 VDC, 40 mA maximum per channel power supply
4 Proximitor/ Seismic Monitor và prox/Seismic I/O module 3500/42M 6 bộ P/N: 3500/42M (Bao gồm mặt trước và mặt sau) - Input Impedance : Standard I/O is 10 kΩ (Proximitor and acceleration inputs - Radial Vibration: 3.94 mV/μm (100 mV/mil) or 7.87 mV/μm (200 mV/mil) - Thrust : 3.94 mV/μm (100 mV/mil) or 7.87 mV/μm (200 mV/mil) - Eccentricity : 3.94 mV/μm (100 mV/mil) or 7.87 mV/μm (200 mV/mil) - Differential Expansion : 0.394 mV/μm (10 mV/mil) or 0.787 mV/μm (20 mV/mil) - Outputs : + Output Impedance :550 Ω + Voltage Compliance (current output): 0 to +12 Vdc range across load Load resistance is 0 to 600 Ω.
5 Tachometer Module và techometer I/O module 3500/50M 6 bộ P/N: 3500/50M (Bao gồm mặt trước và mặt sau) - Input signal range : +10.0 V to -24.0 V Signals exceeding this range are limited internally by the module - Input impedance : 20 k Ω (standard), 40 k Ω (TMR),7.15 k Ω (Internal Barrier) - Output Impedance : 550 Ω - Recorder : +4 to +20 mA. Values are proportional to module full-scale range (rpm or rpm/min). Individual recorder values are provided for each channel. - Voltage Compliance (current output): 0 to +12 Vdc range across load. Load resistance is 0 to 600 Ω - Resolution : 0.3662 µA per bit ±0.25% error at room temperature ±0.7% error over temperature range. Update rate approximately 100 ms - RPM/Min Accuracy : ± 20 rpm/min - RPM Accuracy : + Less than 100 rpm = ± 0.1 rpm +100 to 10,000 rpm = ±1 rpm + 10,000 to 99,999 rpm = ± 0.01% of true shaft speed
6 16 Channel Relay Module và 16 CH Relay MDL 3500/33 6 bộ P/N: 3500/33 Relay contacts rated: Max 5A; Max 250VAC Timer relay rated: Max 2A; Max 220VAC (Bao gồm mặt trước và mặt sau) - Standard Relays : Min Switched Current : 100 mA - 5 Vdc - DC Specifications (Resistive Load) : Max Switched Current : 3.0 A - 5 to 30 Vdc, 0.3 A - 48 Vdc, 0.11 A - 125 Vdc. - AC Specifications (Resistive Load) : + Max Switched Current : 3 A + Max Switched Voltage : 250 Vac - Low Current Relays : DC Specifications (Resistive Load) + Min Switched Current : 1 mA @ 1 Vdc + Max Switched Current : 100 mA - 48 Vdc, 5 mA - 125 Vdc. - Relay Contact Life : 10,000 cycles
7 Overspeed Detection Module và overspeed Detection I/O Module 3500/53 2 Bộ P/N: 3500/53 (Bao gồm mặt trước và mặt sau) - Input Impedance: 20 k Ω. - Transducers: Bently Nevada 3300 8 mm Proximitor 3300 16 mm HTPS, 7200 5 mm, 8 mm, 11 mm, and 14 mm Proximitor; 3300 RAM Proximitor, or Magnetic pickups - Output Impedance: 550 Ω - Transducer Power Supply: -24 Vdc, 40 mA maximum. - Recorder: +4 to +20 mA. Values are proportional to module full-scale range (rpm). Module operation is unaffected by short circuits on recorder output. - Resolution: 0.3662 µA per bit ±0.25% error at room temperature ±0.7% error over temperature range. Update rate approximately 100 ms. - Relays Type: Single-pole, double-throw (SPDT) relays. - Max switched power: DC: 120 W AC: 600 VA. - Max switched current: 5A - Contact Life: 100,000 @-5 A, 24 Vdc or 120 Vac.
8 Position Monitor và position I/O Module 3500/45 2 bộ P/N: 3500/45 (Bao gồm mặt trước và mặt sau) - Input Impedance : 1 MΩ (DC LVDT inputs) 10 kΩ (Proximitor* or RPT inputs) 137 kΩ (AC LVDT inputs) 200 kΩ (Rotary Potentiometer inputs) - Sensitivity : + Thrust : 3.94 mV/μm (100 mV/mil) or 7.87 mV/μm (200 mV/mil) + Differential Expansion : 0.394 mV/μm (10 mV/mil) or 0.787 mV/μm (20 mV/mil) + Ramp Differential Expansion : 0.394 V/mm (10 mV/mil), 0.787 V/mm (20 mV/mil), 3.937 V/mm (100 mV/mil) or 7.874 V/mm (200 mV/mil) + Rotary Potentiometer Valve Position : 41 mV/degree rotation + Rotary Position Transducer (RPT) Valve Position : 140 mV/deg rotation, 70 mV/deg rotation or 50 mV/deg rotation. - Transducer Power Supply: + Proximitor or RPT : -24 Vdc + DC LVDT : +15 Vdc + AC LVDT : 2.3Vrms 3400Hz sine wave + Rotary Potentiometer : -12.38 Vdc + Recorder : +4 to +20 mA Values are proportional to monitor full-scale + Voltage Compliance (current output) : 0 to +12 Vdc range across load Load resistance is 0 to 600 Ω.
9 Industrial Communication ES-1026 2 cái P/N: ES-1026 - Model : ES-1026 - Number of interfaces : 26 - Switch type : 100-megaswitch - Transfer speed : 100Mbps10Mbps - Enthernet : 24 port (RJ45) - Operating temperature: 0 – 60 0C - Input voltage : 110 -220VDC/ 110-240VAC, 47 – 63Hz.
10 Industrial Ethernet Switch EDS-205A 2 cái P/N: EDS-205A - Switch Properties: + MAC Table Size : 1K + Packet Buffer Size : 384 kbits + Processing Type : Store and Forward - Power Parameters : + Connection: 1 removable 4-contact terminal block(s) + Input Current : EDS-205A/205A-T: 0.09 A @ 24 VDC EDS-205A-M-SC/M-ST/S-SC Series: 0.1 A @ 24 VDC + Input Voltage: 12/24/48 VDC, Redundant dual inputs + Operating Voltage : 9.6 to 60 VDC - IP Rating : IP30 - Package Contents: + Device : 1 x EDS-205A Series switch + Documentation : 1 x quick installation guide, 1 x warranty card
11 Switching power supply Weidmuller PRO MAX 72W 2 cái Type: PRO MAX 72W 24V 3A Input: 100-240V~; 2.0-1.0A Operational Voltage: 85-277V~/ 80-370VDC Output: 24VDC 3A - Version : Power supply, switch-mode power supply unit, 24 V - Operating temperature, max: 70 °C - Operating temperature, min : -25 °C - Storage temperature, max : 85 °C - Storage temperature, min : -40 °C - AC current consumption : 1 A - 230 V AC / 1.5 A - 115 V AC - DC current consumption : 1A - 370 VDC / 1,5A - 120 VDC - Inrush current : max. 15 A - Output voltage : 24 V - Rated output voltage : 24 V DC ± 1 % - Protection degree :IP20 - Status indication : LED red/green and relay (≥21.6 V DC LED green, relay on/ ≤20.6 LED red, relay off) - Altitude : 3000m, 3000-6000m derating, @ 6000m 75% Load
12 Module cách ly CZ3035 5 cái Type: CZ3035 Power supply:20-35VDC Input: 4-20mA Output: channel 1: 4-20mA, R≤300Ω channel 2: 4-20mA, R≤300Ω - Field apparatus : 2-wire transmitter,3-wire transmitter, current source - Degree of protection : IP20 - Ambient temperature : -20℃~+60℃ - Flammability rating : UL94/V0 - Conductor cross section solid range : 0.5~2.5mm² - Conductor cross section flexible range : 0.5~2.5mm² - Conductor cross section AWG min : 12 - Conductor cross section AWG max : 24 - Mounting type : DIN35mm
13 Electromech Relay No.: 2961192 30 cái Type: PLC-BSC-24DC/21-21 No.: 2961192 Input: Un=24VDC Out: MAX. 250VAC/2X6A - Coil resistance : 1440 Ω ±10 % (at 20 °C) - Number of Pins : 8-pins - Country/Region of Manufacture: Germany - UPC: Does not apply - EAN: Does not apply - Model: Power Relay - Type: General Purpose Relay - Voltage: 24VDC - Contact material : AgNi - Maximum switching voltage : 250 V AC/DC - Minimum switching voltage : 5 V (at 10 mA) - Min. switching current : 10 mA (At 5 V) - Maximum inrush current : 25 A (20 ms) - Limiting continuous current : 8 A
14 Quint Power QUINT-PS/1AC/24DC/10 2 cái QUINT-PS/1AC/24DC/10 Order-No.: 2866763 Input: 100-240VAC/50-60Hz/4.0-1.7A 110-250VDC/50-60Hz/3.4-1.5A Operation Voltage: 85-264VAC/90-350VDC Output: 24VDC/10A (Boost 15A; 60A/12ms) - Degree of protection : IP20 - Net weight : 1.1 kg - Insulation voltage output / PE : 500 V DC (routine test) - Feedback voltage resistance : max. 35 V DC
Bạn muốn tìm kiếm gói thầu thế mạnh của mình? Hãy để bidwinner quét và lọc giúp bạn:

searchBắt đầu tìm kiếm
Bạn muốn nhận thông báo mời thầu hàng ngày theo bộ lọc từ khóa thông minh qua email cá nhân?

emailĐăng ký email của tôi
-->